Power-Loc – 3/4″ Female Hose Starter Fitting

Start you 1/2″ poly tubing distribution system with this starter fitting if you have a male hose thread (spigot) connection to the water feed. (For female hose thread connection, see IRC745.)

Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.

• Can be used with pressure up to 60 psi
• Compatible with pressure compensating emitterline

⚠ Warning: This product or its packaging has a

CA Prop 65 Warning